|
Karta :
|
APP N° 791
INI:
|
|
Presence control of a flask inside a medicine pack
The presence of a flask inside a medicine pack should be controlled.
|
|
|
Karta :
|
APP N° 513
Param.:
|
INI:
|
|
Color mark detection on a plastic cartridge
A green color mark should be detected on a corrugated white plastic cartridge. It has to be taken into account, that the color mark can be partly scratched.
|
|
|
Karta :
|
APP N° 427
|
Color and guidance control of capsules
The color as well as the orientation of capsules should be controlled during the production and just before packaging.
|
|
|
Karta :
|
APP N° 422
|
Presence control of a seal ring on a plastic component
The presence of a silicon ring on a plastic component should be controlled.
|
|
|
Karta :
|
APP N° 417
|
Fluorescent label detection
Fluorescent labels should be detected on semitransparent carriers.
|
|
|
Karta :
|
APP N° 299
|
Detection of embeddings in branches
Embeddings should be detected in branches. The transportation speed as well as the thickness of the branches can be different from batch to batch. A working range of a height of 100mm should be detected.
|
|
|
Karta :
|
APP N° 258
|
Liquid level control from liquid in semi transparent tube
The liquid level should be controlled with an optical system. At this, there are different kinds of liquids possible: water, detergent and milky liquids. The tube is always the same: semi transparent. It should be taken into account, that neither foam nor liquid film should influence the detection of the liquid level.
|
|
|
Karta :
|
APP N° 122
|
Capsule direction control
The direction of capsules in a mechanical guide should be controlled. The capsules consist of two parts at which one component has a diameter which is approximately 0.3mm bigger as the other. The capsules will be linearly moved with a speed of 0.4m/s and the diameter of the different types is between roughly 3mm and 8mm. The color of the capsules can change from white to black, all colors even transparent types are possible.
|
|
|
Karta :
|
APP N° 116
|
Control of the presence of the spatula in a pharmaceutical box
The presence of a fluorescent spatula in a pharmaceutical box should be checked. During the tests the front side is open.
|
|
|
Karta :
|
APP N° 111
|
Drop control with a laser through beam system
The number as well as the volume of drops should be controlled.
|
|
|
Karta :
|
APP N° 105
|
Spray jet amount control
The density of the spray jet should be controlled.
|
|
|
Karta :
|
APP N° 101
|
Spray-jet control during the glass bottle coating process in the pharmaceutical industry
During the production of glass bottles for the pharmaceutical industry the inner surface must be coated with a certain chemical film, which makes the bottles diffuse. At this crystals will be sprayed through the bottle neck with a nozzle into the bottle. During this process, the bottles have still a temperature of a few hundred centigrade.
|
|
|
Karta :
|
APP N° 76
|
Fluorescent mark control on closures of pharmaceutical flacons
To distinguish between original pharmaceutical flacons and counterfeits the closure of the original will be marked with a fluorescent color. This color mark must be detected during the packaging process.
|
|
|
Karta :
|
APP N° 17
|
Detection of clear and milky glass bottles
In the glass industry during the process of glass bottle manufacturing for the pharmaceutical industry, the glass bottles must be coated inside. The task is to check, whether the bottle is coated or uncoated.
|
|