Практические примеры применения в промышленной сфере
1) Выбрать сферу применения:
Pharmacy (Pharmazie)
2) Выбрать язык:
APP N° 791
|
Presence control of a flask inside a medicine pack The presence of a flask inside a medicine pack should be controlled. |
|
|||||
APP N° 513
|
Color mark detection on a plastic cartridge A green color mark should be detected on a corrugated white plastic cartridge. It has to be taken into account, that the color mark can be partly scratched. |
|
|||||
APP N° 427
|
Color and guidance control of capsules The color as well as the orientation of capsules should be controlled during the production and just before packaging. |
|
|||||
APP N° 422
|
Presence control of a seal ring on a plastic component The presence of a silicon ring on a plastic component should be controlled. |
|
|||||
APP N° 417
|
Fluorescent label detection Fluorescent labels should be detected on semitransparent carriers. |
|
|||||
APP N° 299
|
Detection of embeddings in branches Embeddings should be detected in branches. The transportation speed as well as the thickness of the branches can be different from batch to batch. A working range of a height of 100mm should be detected. |
|
|||||
APP N° 258
|
Liquid level control from liquid in semi transparent tube The liquid level should be controlled with an optical system. At this, there are different kinds of liquids possible: water, detergent and milky liquids. The tube is always the same: semi transparent. It should be taken into account, that neither foam nor liquid film should influence the detection of the liquid level. |
|
|||||
APP N° 122
|
Kontroll av riktning på kapslar Kapslarna består av två delar varav den ena har 0,3 mm större diameter än den andra delen. Kapslarna förflyttas med hastighet 0,4 m/s och har diametrar mellan 3 mm och 8 mm. Färgen på kapslarna kan variera från vit till svart och även transparenta. Capsule direction control The direction of capsules in a mechanical guide should be controlled. The capsules consist of two parts at which one component has a diameter which is approximately 0.3mm bigger as the other. The capsules will be linearly moved with a speed of 0.4m/s and the diameter of the different types is between roughly 3mm and 8mm. The color of the capsules can change from white to black, all colors even transparent types are possible. |
|
|||||
APP N° 116
|
Control of the presence of the spatula in a pharmaceutical box The presence of a fluorescent spatula in a pharmaceutical box should be checked. During the tests the front side is open. |
|
|||||
APP N° 111
|
Drop control with a laser through beam system The number as well as the volume of drops should be controlled. |
|
|||||
APP N° 105
|
Övervakning av spraymunstycke Kontroll av att spraymunstycket inte är igensatt och att rätt mängd vätska kommer ur munstycket. Spray jet amount control The density of the spray jet should be controlled. |
|
|||||
APP N° 101
|
Spray-jet control during the glass bottle coating process in the pharmaceutical industry During the production of glass bottles for the pharmaceutical industry the inner surface must be coated with a certain chemical film, which makes the bottles diffuse. At this crystals will be sprayed through the bottle neck with a nozzle into the bottle. During this process, the bottles have still a temperature of a few hundred centigrade. |
|
|||||
APP N° 76
|
Fluorescent mark control on closures of pharmaceutical flacons To distinguish between original pharmaceutical flacons and counterfeits the closure of the original will be marked with a fluorescent color. This color mark must be detected during the packaging process. |
|
|||||
APP N° 17
|
Särskiljning mellan transparenta och matta glasflaskor Inom glasindustrin ska flaskor för läkemedelsindustrin kontrolleras att de har ytbehandlats inuti och fått ett matt mjölkaktigt utseende. Detection of clear and milky glass bottles In the glass industry during the process of glass bottle manufacturing for the pharmaceutical industry, the glass bottles must be coated inside. The task is to check, whether the bottle is coated or uncoated. |
|
