Sensor Instruments
Entwicklungs- und Vertriebs GmbH
Schlinding 11
D-94169 Thurmansbang
Telefon +49 8544 9719-0
Telefax +49 8544 9719-13
info@sensorinstruments.de

Videos



 Presentation of the SPECTRO-M series: Oil detection

The recognition of thin oil layers on metals, especially in sheet forming processes is assuming ever-greater importance in the e-mobility age. If it is necessary to determine whether the drawing oil layer applied is located within the tolerance range before the punching process, it is first necessary to check after the cleaning procedure whether residual oil has been removed from the metal surface to the whole. The increasing use of synthetic special oils means that previous methods used to perform oil controls can no longer be used, as these new oils do not have any fluorescent characteristics. In the mid-wavelength infrared light range (MIR) on the other hand, even ultra-thin layers are rendered “visible” again.



This video gives a brief insight into the standardized MIR absorption method. It also deals with the evaporation process of oils and establishes a relation to the most common approach used to determine the surface tension value using test ink methods.
00:05:06 (Royalty free music by frametraxx.de)



Software SensorFinder V1.1 in connection with cab-4/USB or cab-5/USB

The software "SensorFinder" is a tool to search for intelligent sensors from Sensor Instruments, which are connected to the local PC. The identity, firmware and connection settings of the respective sensors are listed for each individual sensor in a clear, compact representation.



This video shows how to install the "SensorFinder" software, how a USB converter of type cab-4/USB or cab-5/USB establishes a connection between sensor and PC and how to find available sensors with "SensorFinder".
00:04:11 (Royalty free music by frametraxx.de)



Software SensorFinder V1.1 in connection with cab-4/ETH or cab-5/ETH

The software "SensorFinder" is a tool to search for intelligent sensors from Sensor Instruments, which are connected to the local PC. The identity, firmware and connection settings of the respective sensors are listed for each individual sensor in a clear, compact representation.



This video shows how to install the "SensorFinder" software, how an Ethernet converter of type cab-4/ETH or cab-5/ETH establishes a connection between sensor and PC and how to find available sensors with "SensorFinder".
00:03:23 (Royalty free music by frametraxx.de)



  Tutorial software L-LAS-Spray-Control-Scope V2.0



Parameterization of the software L-LAS-Spray-Control-Scope V2.0 for the implementation of spray jet control with the line sensor L-LAS-TB-28-T-AL-SC (transmitter) and L-LAS-TB-28-R-AL-SC (receiver).
00:13:33 (Royalty free music by frametraxx.de)



 
C
ounting transparent plastic covers with
         SPECTRO-1-CONLAS and A-LAS-N-F16-9.5x0.8-150/80-C-2m




Application example of the control electronics SPECTRO-1-CONLAS in connection with the sensor front end A-LAS-N-F16-9.5x0.8-150/80-C-2m:
Counting transparent plastic covers.
00:00:51 (Royalty free music by frametraxx.de)



 
  P
roduct authentication with LUMI-STAR-MOBILE-BL/OR-POL-IOS



Application example with a LUMI-STAR-MOBILE-BL/OR-POL-IOS:
Product authentication of blister foils.
00:04:44 (Royalty free music by frametraxx.de)



  Leather marking with LUMI-INLINE-SL-IR/IR



Application example of a LUMI-INLINE-SL-IR/IR for leather marking:
Inline detectors for automated checking of product markers during the production process.
00:01:33 (Royalty free music by frametraxx.de)



  Tutorial spray jet control with L-LAS-TB-75-AL



Implementation of the spray jet control with the line sensor L-LAS-TB-75-T-AL (transmitter) and L-LAS-TB-75-R-AL (receiver) using a car windscreen washer jet as an example. 



  Tutorial DIFFERENTIATOR



Application video for parameterisation of the SPECTRO-1-CONLAS control unit in combination with sensor frontend A-LAS-N-F16-9.5x0.8-150/80-C-2m. The difficulty of this measuring task is the correct counting of transparent plastic caps. The "DIFFERENTIATOR" operating mode solves this problem.



  Tutorial EXTERN TEACH with color sensor SPECTRO-3-DIL-SL



The EXTERN TEACH option allows you to teach colors without using a PC.



  Tutorial spray jet monitoring with A-LAS-CON1



Implementation of spray jet monitoring: The volume quantity of a spraying process should be determined. This application uses an A-LAS-CON1 control unit and an analog laser light barrier of type A-LAS-F24-16x1-40/60.



  Tutorial SPECTRO3-COMFORT-Scope software



Operation of the SPECTRO3-COMFORT-Scope Software



  Tutorial microdosing monitoring



Monitoring of a microdosing system: The parameters to be monitored are the pulses at which the material to be dosed is emitted and the quantity of the material. In this setup, the control electronics A-LAS-CON1 and an analog laser photoelectric sensor of the type A-LAS-F12-1x0.2-50/50 are used.



  Tutorial color detection of moving self-luminous objects



Colour and speed detection of "moving self-luminous objects" In this application both the colour and the speed of moving and luminous LEDs (moving self-luminous objects) should be detected.



  Tutorial SPECTRO-3 color sensor - PARA mode
            (works with two parameter sets)



Patterns of the interior field (automotive) should be divided in two groups (dark and bright) and should be distinguished with different sets of parameters.



  Tutorial SPECTRO-3 color sensor for interior areas



In the interior areas (automotive sector) various textiles or imitation leather should be detected whose surfaces differ in color and structur (gloss). For this task situation a color gloss detection sensor type SPECTRO-3-50-FCL is used, the handling of this sensor is being demonstrated here: Selection of the sensor, connection setup, parameter setting, teach process, verification of the taught colors, color recognition, evaluation.



  Color-gloss and structure sensors of COAST Series



Color, gloss and structure detection with the COAST hybrid-sensor.



NEWS

We welcome our new sales partner for Nigeria:



more...



New applications:


Color mark recognition on transparent plastic films
(N° 765)
Gloss measurement on decorative films
(N° 766)
Gloss measurement of painted aluminum plates
(N° 767)

more...



New press releases:

Inline spray jet control outside and inside the potentially explosive atmosphere!
(SI-JET series, SPECTRO-2 series, SPECTRO-1 series, L-LAS-TB-AL-SC
 series)
Inline gloss measurement of painted wooden panels
(GLOSS series)

more...



New videos:

Video presentation:
SPECTRO-M series -
Oil detection
Software SensorFinder V1.1 in connection with cab-4/USB or cab-5/USB
Software SensorFinder V1.1 in connection with cab-4/ETH or cab-5/ETH

more...



Software news:

SPECTRO2-Scope V1.7
Changes after software update from V1.6 to V1.7
(N° 23)

more...



Trade fairs:

all about automation 2021
6 & 7 July 2021
Messe Friedrichshafen


more...




FIND US ON ....

Facebook Twitter Instagram Youtube in

TOP