SPECTRO-1-FIO Series
Single-channel sensor systems for use with glass fiber opticsGeneral technical data ....
GENERAL TECHNICAL DATA:
Software | Windows® PC software: SPECTRO1-Scope |
Voltage supply | +24VDC (± 10%), reserve polarity protected, overload protected |
Current consumption | - SPECTRO-1-FIO, -IR, -IR2, -IR3, -IR4, -UV/VIS, -UV/UV, -UVC/UVC: <160mA - SPECTRO-1-FIO-BL/YL: <220mA - SPECTRO-1-FIO-UV/YL-HP, -UV/VIS-HP, -UV/UV-HP: <220mA - SPECTRO-1-FIO-UV-365/LP400-HP, -385/LP400-HP: <220mA - SPECTRO-1-FIO-IR, -UV/VIS with external light source: <500mA |
Max. switching current | 100mA, short circuit proof |
Switching state indication | 2 yellow LEDs (OUT0 and OUT1) |
Inputs digital (2x) | IN0 and IN1 (0V/+24V) |
Outputs digital (2x) | OUT0 and OUT1 (0V/+24V) |
Output analog (1x) | Voltage 0...+10V or current 4...20mA (adjustable via PC software) |
Interface | RS232 (USB and Ethernet converter available) |
Pulse lengthening | 0...100ms, abjustable via PC software |
Averaging | max. 32768 values, adjustable via PC software |
Scan frequency | LED operation, adjustable via PC software: - AC operation: max. 50kHz (depends on parameterization) - DC and OFF operation: max. 175kHz (depends on parameterization) |
Switching frequency | max. 60kHz |
Analog band width | max. 90kHz (-3dB) |
Transmitter (light source) | depends on sensor type |
Transmitter control | can be switched via PC software: AC operation (LED MODE-AC), DC operation (LED MODE -DC), OFF operation (LED MODE-OFF) |
Measuring range | depends on sensor type |
Receiver | Photo diode |
Gain | Receiver gain setting: 8 steps (AMP1...AMP8), adjustable via PC software |
Ambient light | max. 5000 Lux |
Detection range | depends on sensor type |
Reproducibility | 2 digits at 12-bit A/D conversion |
Housing dimensions | depends on sensor type |
Housing material | Aluminum, anodized in black (if optics holding device: anodized) |
Connectors | - to PLC: 8-pole fem. connector Binder 712 - to PC: 4-pole fem. connector Binder 707 - to external light source (only in case of SPECTRO-1-FIO-IR, -UV/VIS, -UV/UV, -UVC): 4-pole fem. connector Binder 707 |
Connecting cables | - to PLC: cab-las8/SPS - to PC: cab-las4/PC, cab-4/USB or cab-4/ETH |
Operating temp. range | -20°C ... +55°C |
Storage temp. range | -20°C ... +85°C |
Enclosure rating | IP64 |
EMC test acc. to | DIN EN 60947-5-2 |
External light source (optionally) |
- ELS-IRL or ELS-IRL-FIO (for use with SPECTRO-1-FIO-IR only) - ELS-UV-1P (for use with SPECTRO-1-FIO-UV/VIS, -UV/UV, -UVC) |